Vim

Exiting

:q[uit]

Quit Vim

This fails when changes have been made.

:q[uit]!

Quit without writing

:qa

Quit all buffers / tabs

:cq[uit]

Quit always, without writing

:wq

Write the current file and exit

:wqa

Quit and write all buffers / tabs

:wq!

Write the current file and exit always

:wq {file}

Write to {file}. Exit if not editing the last

:wq! {file}

Write to {file} and exit always

:[range]wq[!]

Write the lines in [range] and exit always

ZZ

Write current file, if modified, and exit

ZQ

Quit current file and exit

Same as :q!.

Editing a File

:e[dit]

Edit the current file

This is useful to re-edit the current file, when it has been changed outside of Vim.

:e[dit]!

Edit the current file always

Discard any changes to the current buffer. This is useful if you want to start all over again.

:e[dit] {file}

Edit {file}

:e[dit]! {file}

Edit {file} always

Discard any changes to the current buffer.

gf

Edit the file whose name is under or after the cursor

Mnemonic: goto file.

Inserting Text

a

Append text after the cursor [count] times

A

Append text at the end of the line [count] times

i

Insert text before the cursor [count] times

I

Insert text before the first non-blank in the line [count] times

gI

Insert text in column 1 [count] times

o

Begin a new line below the cursor and insert text, repeat [count] times

O

Begin a new line above the cursor and insert text, repeat [count] times

Inserting a File

:r[ead] [name]

Insert the file [name] below the cursor

:r[ead] !{cmd}

Execute {cmd} and insert its standard output below the cursor

Deleting Text

<Del>

x

Delete [count] characters under and after the cursor

X

Delete [count] characters before the cursor

d{motion}

Delete text that {motion} moves over

dd

Delete [count] lines

D

Delete the characters under the cursor until the end of the line

{Visual}x

{Visual}d

Delete the highlighted text

For {Visual} see Selecting Text.

{Visual}CTRL-H

{Visual}<BS>

Delete the highlighted text when in Select mode

{Visual}X

{Visual}D

Delete the highlighted lines

:[range]d[elete]

Delete [range] lines

Default: current line.

:[range]d[elete] {count}

Delete {count} lines, starting with [range]

Changing / Replacing Text

r{char}

Replace the character under the cursor with {char}

R

Enter Insert mode, replacing characters rather than inserting

~

Switch case of the character under the cursor and move the cursor to the right

If a [count] is given, do that many characters.

g~{motion}

Switch case of {motion} text

{Visual}~

Switch case of highlighted text

{Visual}U

Uppercase highlighted text

SHIFT+I<comment-char>ESC

Comment vertical selection

Select range in column where comment char should appear with CTRL+V.

x

Uncomment vertical selection

Select range in column where comment char should be removed with CTRL+V.

Information

%

Jump to matching brace

*

Highlight all occurrences of word under cursor

Ranges

A range permits a command to be applied to a group of lines in the current buffer. For most commands, the default range is the current line.

  • :21s/old/new/g - Line 21
  • :1s/old/new/g - First line
  • :$s/old/new/g - Last line
  • :%s/old/new/g - All lines
  • :.,$s/old/new/g - Current line to end

Substituting

For each line in [range] replace a match of {pattern} with {string}

:[range]s[ubstitute]/{pattern}/{string}/[c][e][g][p][r][i][I] [count]

The arguments that you can use for the substitute commands:

  • [c] Confirm each substitution. Vim positions the cursor on the matching string. You can type:

    • y to substitute this match
    • n to skip this match
    • a to substitute this and all remaining matches
    • q to quit substituting
    • CTRL-E to scroll the screen up
    • CTRL-Y to scroll the screen down
  • [e] When the search pattern fails, do not issue an error message and, in particular, continue in maps as if no error occurred

  • [g] Replace all occurrences in the line. Without this argument, replacement occurs only for the first occurrence in each line

  • [i] Ignore case for the pattern

  • [I] Don't ignore case for the pattern

  • [p] Print the line containing the last substitute

Copying and Moving Text

"{a-zA-Z0-9.%#:-"}

Use register {a-zA-Z0-9.%#:-"} for next delete, yank or put

Use uppercase character to append with delete and yank. {.%#:} only work with put.

:reg[isters]

:di[splay]

Display the contents of all numbered and named registers

:reg[isters] {arg}

:di[splay] [arg]

Display the contents of the numbered and named registers that are mentioned in {arg}

["x]y{motion}

Yank {motion} text [into register x]

["x]yy

["x]Y

Yank [count] lines [into register x]

{Visual}["x]y

Yank the highlighted text [into register x]

For {Visual} see Selecting Text.

{Visual}["x]Y

Yank the highlighted lines [into register x]

:[range]y[ank] [x]

Yank [range] lines [into register x]

:[range]y[ank] [x] {count}

Yank {count} lines, starting with last line number in [range], [into register x]

Default: current line.

["x]p

Put the text [from register x] after the cursor [count] times

["x]P

Put the text [from register x] before the cursor [count] times

["x]gp

Just like p, but leave the cursor just after the new text

["x]gP

Just like P, but leave the cursor just after the new text

:[line]pu[t] [x]

Put the text [from register x] after [line]

Default: current line.

:[line]pu[t]! [x]

Put the text [from register x] before [line]

Default: current line.

Undo, Redo and Repeat

u

Undo [count] changes

:u[ndo]

Undo one change

CTRL-R

Redo [count] changes which were undone

:red[o]

Redo one change which was undone

U

Undo all latest changes on one line.

.

Repeat last change, with count replaced with [count]

Moving Around

Basic motion commands

  k              <up>
h   l      <left>    <right>
  j             <down>

h

<Left>

[count] characters to the left (exclusive)

l

<Right>

<Space>

[count] characters to the right (exclusive)

k

<Up>

CTRL-P

[count] lines upward

j

<Down>

CTRL-J

<NL>

CTRL-N

[count] lines downward (linewise)

0

<Home>

To the first character of the line (exclusive)

^

To the first non-blank character of the line

$

<End>

To the end of the line and [count - 1] lines downward

g0

g<Home>

To the first character of the screen line (exclusive) when lines wrap ('wrap on). Differs from 0 when a line is wider than the screen

To the leftmost character of the current line that is on the screen when lines don't wrap ('wrap' off). Differs from 0 when the first character of the line is not on the screen

g^

To the first non-blank character of the screen line (exclusive) when lines wrap ('wrap' on). Differs from ^ when a line is wider than the screen.

To the leftmost non-blank character of the current line that is on the screen when lines don't wrap ('wrap' off). Differs from ^ when the first non-blank character of the line is not on the screen

g$

g<End>

To the last character of the screen line and [count - 1] screen lines downward (inclusive) when lines wrap ('wrap' on). Differs from $ when a line is wider than the screen.

To the rightmost character of the current line that is visible on the screen when lines don't wrap ('wrap' off). Differs from $ when the last character of the line is not on the screen or when a count is used

f{char}

To [count]'th occurrence of {char} to the right. The cursor is placed on {char} (inclusive)

F{char}

To the [count]'th occurrence of {char} to the left. The cursor is placed on {char} (inclusive)

t{char}

Till before [count]'th occurrence of {char} to the right. The cursor is placed on the character left of {char} (inclusive)

T{char}

Till after [count]'th occurrence of {char} to the left. The cursor is placed on the character right of {char} (inclusive)

;

Repeat latest f, t, F or T [count] times

,

Repeat latest f, t, F or T in opposite direction [count] times

- <minus>

[count] lines upward, on the first non-blank character (linewise)

+

CTRL-M

<CR>

[count] lines downward, on the first non-blank character (linewise)

_ <underscore>

[count] - 1 lines downward, on the first non-blank character (linewise)

CTRL-End

G

Goto line [count] on the first non-blank character

Default: last line.

CTRL-Home

gg

Goto line [count] on the first non-blank character

Default: first line.

SHIFT-Right

w

[count] words forward

CTRL-Right

W

[count] WORDS forward

e

Forward to the end of word [count]

E

Forward to the end of WORD [count]

SHIFT-Left

b

[count] words backward

CTRL-Left

B

[count] WORDS backward

ge

Backward to the end of word [count]

gE

Backward to the end of WORD [count]

H

Move to the top of the screen

M

Move to the middle of the screen

L

Move to the bottom of the screen

zz

Scroll the line with the cursor to the center of the screen

zt

Scroll the line with the cursor to the top

zb

Scroll the line with the cursor to the bottom

The following commands move over words or WORDS.

A word consists of a sequence of letters, digits and underscores, or a sequence of other non-blank characters, separated with white space (spaces, tabs, <EOL>). This can be changed with the 'iskeyword' option.

A WORD consists of a sequence of non-blank characters, separated with white space. An empty line is also considered to be a word and a WORD.

(

[count] sentences backward

)

[count] sentences forward

{

[count] paragraphs backward

}

[count] paragraphs forward

]]

[count] sections forward or to the next '{' in the first column

When used after an operator, then the '}' in the first column.

][

[count] sections forward or to the next '}' in the first column

[[

[count] sections backward or to the previous '{' in the first column

[]

[count] sections backward or to the previous '}' in the first column

Marks

m{a-zA-Z}

Set mark {a-zA-Z} at cursor position

Does not move the cursor, this is not a motion command.

m'

m\`

Set the previous context mark

This can be jumped to with the '' or `` command. Does not move the cursor, this is not a motion command.

:[range]ma[rk] {a-zA-Z}

:[range]k{a-zA-Z}

Set mark {a-zA-Z} at last line number in [range], column 0

Default is cursor line.

'{a-z}

To the first non-blank character on the line with mark {a-z} (linewise)

'{A-Z0-9}

To the first non-blank character on the line with mark {A-Z0-9} in the correct file

`{a-z}

To the mark {a-z}

`{A-Z0-9}

To the mark {A-Z0-9} in the correct file

:marks

List all the current marks (not a motion command)

:marks {arg}

List the marks that are mentioned in {arg} (not a motion command). For example:

Searching

/{pattern}[/]<CR>

Search forward for the [count]'th occurrence of {pattern}

/{pattern}/{offset}<CR>

Search forward for the [count]'th occurrence of {pattern} and go {offset} lines up or down

/<CR>

Search forward for the [count]'th latest used pattern

//{offset}<CR>

Search forward for the [count]'th latest used pattern with new

If {offset} is empty no offset is used.

?{pattern}[?]<CR>

Search backward for the [count]'th previous occurrence of {pattern}

?{pattern}?{offset}<CR>

Search backward for the [count]'th previous occurrence of {pattern} and go {offset} lines up or down

?<CR>

Search backward for the [count]'th latest used pattern

??{offset}<CR>

Search backward for the [count]'th latest used pattern with new {offset}

If {offset} is empty no offset is used.

n

Repeat the latest / or ? [count] times

N

Repeat the latest / or ? [count] times in opposite direction

:lv {pattern} [g][j] {file(s)}

Search in files with internal grep

Results are put into "quickfix list" open with :cw

  • 'g' return all matches not just one per line
  • 'j' don't jump to first match automatically
  • for recursive search use ** file pattern like **/*.c

Selecting Text (Visual Mode)

To select text, enter visual mode with one of the commands below, and use motion commands to highlight the text you are interested in. Then, use some command on the text.

The operators that can be used are:

  • ~ switch case
  • d delete
  • c change
  • y yank
  • > shift right
  • < shift left
  • ! filter through external command
  • = filter through 'equalprg' option command
  • gq format lines to 'textwidth' length

v

Start Visual mode per character

V

Start Visual mode linewise (horizontal selection)

CTRL-V

Start Visual mode columnwise (vertical selection)

<Esc>

Exit Visual mode without making any changes

viw

Visually select inner word (where the cursor is positioned)

Suspending

CTRL-Z

Suspend Vim

Like :stop. Works in Normal and in Visual mode. In Insert and Command-line mode, the CTRL-Z is inserted as a normal character.

:sus[pend][!]

:st[op][!]

Suspend Vim!

If the '!' is not given and 'autowrite' is set, every buffer with changes and a file name is written out. If the '!' is given or 'autowrite' is not set, changed buffers are not written, don't forget to bring Vim back to the foreground later!

Multiple Windows

:e filename

Edit another file

:split filename

Split window and load another file

CTRL-W v

Vertical split current window

CTRL-W s

Horizontal split current window

CTRL-W Arrow Up

Move cursor up a window

CTRL-W CTRL-W

Move cursor to another window (cycle)

CTRL-W_

Maximize current window

CTRL-W=

Make all equal size

10 CTRL-W+

Increase window size by 10 lines

:vsplit file

Vertical split

:sview file

Same as split, but readonly

:hide

Close current window

:only

Keep only this window open

:ls

Show current buffers

:b 2

Open buffer #2 in this window

:bd[n]

Close current buffer

If [n] is given close buffer #n. #n can be gathered with :ls.

Browsing with Tags

When editing programs, there is often a need to jump to another location. Vim uses a tags file that lists each word and location. The tags file has to be created by a utility able to handle the syntax of your files, and has to be updated after significant editing has occurred.

CTRL-]

LMB-on-tag+CTRL

g LMB-on-tag

Jump to tag

Postion the cursor over a tag name, visually select text, use the left-mouse-button (LMB). Pushes current location to tag stack for later return.

CTRL+t

Return after jump

Pops location to jump to from tag stack.

:tags

Show tag stack

List of return locations, used by CTRL+t.

Internal Lists

  • Vim has one global quickfix list. The list contains file positions filled by other commands.
  • Vim has one location list per window. The list is similar to a quickfix list and contains a list of positions in filesi.

:cw

Open "quickfix list" (one global list)

:ccl

Close "quickfix list"

:lw

Open "location list" (one per window)

Notes